MDX Slurry Pumps
|
The final result is a large BEP sweet spot providing stable sump levels over a large variation of flows. The MDX pump maximizes productivity and minimizes cost by matching operating cycle times with scheduled mill outages. Select the MDX for your next mill circuit application to help ensure cost-effective and continuous operations.
Range
- Flows: to 62,000 gpm / 14.000 m3/h
- TDH: to 300 ft / 90 m
Select Best Material Options for Longest Wear Life
- Metal, Rubber or Ceramic Suction Liner available
- Rubber or Metal Hub Liner available on larger sizes
- Open Hub Side Casing offered on larger sizes for right or left hand pumping applications
Other options are also available to custom tailor the MDX to meet a wide range of application requirements.
- Reduced eye suction liners
- Adjustable liner assemblies
- Quick release wet end
- Full vanes to fit oversized shrouds
Lower Specific Speed Design: A large diameter impeller results in slower pump operation leading to extended parts wear life. In addition, the lower specific speed allows the pump operations to meet the variable flow conditions confronted in modern mill circuits.
Up to 300 psi Pressure Rating: Thicker cross sections translate into long and reliable pump service life.
Deep Base Circle: Minimizes aggressive particle impingement providing a sliding wear action. Typical abrasive wear drops dramatically.
Oversize Shrouds: Enhanced vane performance provides added clearing action minimizing recirculation and wear between the impeller and suction liner.
Patented Inlet 5V Impeller: Designed to handle both liquid and solid phases within the slurry. This maximizes pump performance and wear life.
Slurry Diverter: GIW’s latest technology dramatically increases suction liner life by reducing particle recirculation between the impeller and liner.
Adjustable Suction Liner: Extended suction liner wear life maximizes productivity and minimizes cost by matching operating cycle times with scheduled mill outages.
Reduce downtime by matching life cycles
To increase productivity and decrease costs, all MDX pumps are designed to match the life cycle of your mill circuit operations. GIW uses system modeling tools, including JK Simmet™, along with their proprietary Pump Operating Cost Calculator to identify the duty conditions and to select the best solution for your pumping needs.
Your Next Step
- Contact GIW Industries.
- Find your local GIW representative.
- Order pumps or request a pump quotation.
- Order parts or request a parts quotation.
