The slurry pumps and other products listed below are applied in phosphate.

LCC-M Slurry Pumps

The LCC-M Series Slurry Pump is a hard metal, horizontal, end-suction, centrifugal slurry pump. The hydraulic wet end consists of three components: a shell or casing, an impeller that screws onto the shaft and a suction plate/liner to permit easy assembly and disassembly for maintenance and inspections.

LSA-S Slurry Pumps

LSA-S Series Slurry Pumps are designed for severe duties with operating flows from 100 gallons per minute (20 cubic meters per hour) to more than 60,000 gallons per minute (14.000 cubic meters per hour). These high-performance, low-maintenance slurry pumps are applied primarily in ore transport, mill discharge, cyclone feed, tailings and plant process.

TBC Slurry Pumps

TBC Slurry Pumps are designed for severe duty high pressure applications with operating flows from 5, 000 - 80,000 gpm (1.135 - 18.200 m3/h). Total dynamic head is up to 300 ft. (90m) per stage and power rating is up to 10,000 hp (7450 kW).

WBC Slurry Pumps

WBC Slurry Pumps are a patented design for severe duties with operating flows up to 70,000 gpm (16.000 m3/h). Total dynamic head is up to 260 ft. (80 m) per stage and power rating is up to 8,000 hp (5960 kW).