WBC Slurry Pumps

The pump shell is designed to virtually eliminate bending movements that can cause a structural failure during a pressure surge.

Shell, impeller and suction liner are made of GIW Gasite alloys that are recognized for superior abrasion resistance. The three vane impellers allow for maximum particle size passage. The pump is equipped with GIW’s proven heavy duty, pillow block type bearing assembly with adapter mounted, spherical roller radial bearings and separate steep angle thrust bearing. A fused carbide coated shaft sleeve and a split stuffing box assembly for conventional packing are provided.

Downloadable Files
You need Adobe's Acrobat Reader to view any PDF file on this page.

When you roll your mouse cursor over "File Size," a window containing approximate file download times will pop up.

Typical Applications

• Phosphate matrix
• High pressure booster pump
• Ore transport (subject to surge pressures)

Range

• Discharge diameter – 26 in./660 mm
• Impeller diameters – 46" and 54"
• Flows – 60,000 gpm/13600 m3/h
• TDH to 260 ft./80 m
• Capabilities up to 4,000 HP
• Hydrostatic tested up to 600 psi

Construction

• Horizontal end suction centrifugal type design transfers stress loads to heavy duty, non-wearing side plates.
• Single wall pump shell with replaceable suction liner and three-vane impeller.

Features

• High sustained hydraulic efficiencies
• Absorbs shock loads
• Excellent suction characteristics
• Computer designed for long wear life
• Heavy duty bearing assembly

Application Photographs

Phosphate Matrix

Your Next Step

• E-mail sales@giwindustries.com.
• Contact your local GIW representative.
• Request a pump quotation.

There are no warranties, express or implied, in this information. See the Limited Warranty found in the owner's manual or write GIW Industries Inc. The company reserves the right to make design changes without obligation to make these changes on units previously sold.